Kingston Fury Beast 8GB (1x8GB) DDR4 UDIMM 2666MHz CL16 1.2V Non ECC Single Rank Gaming Desktop PC Memory
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Kingston

Kingston Fury Beast 8GB (1x8GB) DDR4 UDIMM 2666MHz CL16 1.2V Non ECC Single Rank Gaming Desktop PC Memory

Available: Out of Stock
$0.00
Pre-order
Successful pre-order.Thanks for contacting us!

Kingston Fury Beast 8GB (1x8GB) DDR4 UDIMM 2666MHz CL16 1.2V Non ECC Single Rank Gaming Desktop PC Memory

DESCRIPTION
FURY KF426C16BB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.34' (34mm), w/heatsink
• Default (Plug N Play): DDR4-2666 CL16-18-18 @ 1.2V

Kingston Fury Beast 8GB (1x8GB) DDR4 UDIMM 2666MHz CL16 1.2V Non ECC Single Rank Gaming Desktop PC Memory

DESCRIPTION
FURY KF426C16BB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.34' (34mm), w/heatsink
• Default (Plug N Play): DDR4-2666 CL16-18-18 @ 1.2V